MOAR Civic MODS (in the bin!) *DISRESPECTED VTEC* (EP3)

Our epic Civic build continues as we install 3 spoon engines. On top of that, we just went into Harry's, and ordered 3 T66 turbos, with NOS. And a Motec exhaust - enough power to disrespect the nasal cavity of Honda fans everywhere!
OK seriously - we just keep working on this absolute nugget of a trash box Civic with the hopes that one day it'll be good enough for Hector (and Marty) but it's turning into a bigger job than we thought!
This series is shot "disrespected nose" which means no music, no VO and limited editing. You've been warned.
Be sure to check out the MCM Facebook Page for regular Updates
✌️ JDM Air Fresheners
👕 BRAND NEW Engine Heart T-shirt
🔔 Hit the bell next to Subscribe so you don't miss a video!
Also something to note around Mighty Car Mods: we are normal guys and are not trained mechanics. We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy. Talk to a qualified mechanic if you are in any doubt. Some of the products featured in this video may be supplied by sponsors. For a list of our current sponsors please go to

Ladda ner



  • FREE MCM Calendars with every T-shirt order. Limited time only. GET ON IT

    Mighty Car ModsMighty Car Mods2 månader sedan
    • Try the b520p vivid blue buy honda its banging colour with look mad with the hard race or championship white always look clean as

      Michael HartleyMichael Hartley5 dagar sedan
    • The only proper way to customize a Honda is to use Chinese parts made by communists on eBay 😲

      Project 2OH9Project 2OH921 dag sedan
    • Awesome 😂 you guys crack me up IN THE BIN I love the look off the after market parts already getting sex spec ready on a serious note you guys are doing this fast

      curtis wilcockcurtis wilcockMånad sedan
    • Awesome 😂 you guys crack me up IN THE BIN I love the look off the after market parts already getting sex spec ready on a serious note you guys are doing this fast

      curtis wilcockcurtis wilcockMånad sedan
    • Awesome 😂 you guys crack me up IN THE BIN I love the look off the after market parts already getting sex spec ready on a serious note you guys are doing this fast

      curtis wilcockcurtis wilcockMånad sedan
  • Thank you guys so much use have taught me so much about cars & mods & everything bloody top blokes use are 👍🏼

    nick freynick freyDag sedan
  • Im not a mechanic, but I've heard mechanics in shops go "oh no it's a volvo" many times haha

    Serioga MarkovasSerioga Markovas6 dagar sedan
  • Hell yeah you all give me the motorvation

    TellYouWhat 95TellYouWhat 957 dagar sedan
  • I think about those things sometimes too, Moog.

    Praise The SunPraise The Sun7 dagar sedan
  • CRVs are sick

    Emanuel BurgestEmanuel Burgest11 dagar sedan
  • Older Volvos are great to work on, only the new ones that are a nightmare

    Neil MacleanNeil Maclean20 dagar sedan
  • CR-Vs are much better. At exploding the front ball joints.

    UGU ZachUGU Zach20 dagar sedan

    Keith DuncanKeith Duncan21 dag sedan
  • I'm no expert but it doesn't look like a ep3 🤣🤣

    Starburst 0599Starburst 059924 dagar sedan
  • Ya had a chance to buy "Moog" ball joints and you missed it

    Jeffrey CormierJeffrey Cormier26 dagar sedan
  • Ребята поняли,что всякая шаболда вроде мини, фольксов и подобного шлака людям не интересна и вернулись к истокам.Одобряю!

    Leather CraftLeather Craft26 dagar sedan
  • Dish soap with a little bit of sugar works well. Friend of mine who is a mechanic showed me that trick... Works well

    Classic FrenzyClassic Frenzy27 dagar sedan
  • those inner tie rods look shot

    createachanneltopostcreateachanneltopost28 dagar sedan
  • One of Honda’s downfalls were welding the nuts to the body currently have an issue with mine on that rn

    Baps 11Baps 11Månad sedan
  • Sex Spec low rider 1980's American build, make it happen MCM.

    SiriaxSiriaxMånad sedan
  • Awsome video as always 24:27 bit of a retarded moment and also i am sure u guys already know not to tighten bolts with bussinga while its in the air :P

    BalizzaarBalizzaarMånad sedan
  • 3:26 flawless logic

    ZaneofAustinZaneofAustinMånad sedan
  • yall should get a saturn sky and flex on haters.

    ZaneofAustinZaneofAustinMånad sedan
  • I am fully convinced that the MCM garage is haunted, lol.

    Weeb Trash 「オタクゴミ」Weeb Trash 「オタクゴミ」Månad sedan
  • Super cool that you guys don't throw parts away in the trash! I always keep my parts in bins too!

    Silent HaikuSilent HaikuMånad sedan
  • Where do they get all of the parts for the car?

    Sverri OlsenSverri OlsenMånad sedan
  • All the parts in bubble-wrap bags and foamed-lined boxes, that Moog un-wraps and puts them straight on the concrete floor...

    Jonathan PalmerJonathan PalmerMånad sedan
  • The missing parts warped into oblivion. That or one of your buds took them and threw them in the bin because they knew you would get it back together anyways. Its dark but possible.

    Kendrick WilliamsKendrick WilliamsMånad sedan
  • So obviously its better

    Kendrick WilliamsKendrick WilliamsMånad sedan
  • России нужен СЕКС СПЕК! Russia needs sex spec !

    Эдуард СупрановичЭдуард СупрановичMånad sedan
  • You can wash oil off with oil, vegetable oil. Then you can wash off the vegetable oil with normal soap

    Carl MarcusCarl MarcusMånad sedan
  • I never imagined it would be so cathartic to listen to cars being pulled apart and put back together.

    Ben ThomasBen ThomasMånad sedan
  • why do you have a full cutlery set in your fucking garage lmao

    Ian GrimardIan GrimardMånad sedan
  • I became an auto tech because of the motivation you guys gave me through your videos so mad props to you guys too

    Ismail EdunIsmail EdunMånad sedan
  • You are yet to discover the second bonnet stay hole so that the bonnet goes vertical, it's all very exciting...

    brYan obrYan oMånad sedan
  • Those are some good questions about plurals. I always think a single Lexus should be Lexi. Because Lexus's doesn't make sense so shouldn't more than one be known as Lexus. 🤔🤣 Or is it just like Sheep? 😆

    Chrys PerryChrys PerryMånad sedan
  • Ur welcome

    pokythornespokythornesMånad sedan
  • It’s not a racing civic if it hasn’t got Anodised scaffolding on display at the rear.

    MrGuvEuromanMrGuvEuromanMånad sedan
  • U can upgrade to next brakes which at least in the state you can still get at an auto parts store for $50

    Joshua NicolaiJoshua NicolaiMånad sedan
  • I would usually change the inner tie rods also if the boots are that bad off

    MLP Podcast ChannelMLP Podcast ChannelMånad sedan
  • Whyy yall didnt do the inner tie rods?? They are wooooorn

  • I had to unsub because of those (in the bin) cuts. It’s fucking annoying.

    juan Perezjuan PerezMånad sedan
  • Does that upper balljoint adjustment have enough room for tools if you put those hexagon bolts that way? I would put those bolts other way around so that when you are adjusting your suspension you have those hexagons toward up and nuts down. Haven't build that kind of suspension thou.

    netweightracingnetweightracingMånad sedan
  • 17:17 option #3: grease up your hands with clean grease (petroleum jelly) before you get 'em dirty. I even use PJ to extract the (smell of) petrol from my hands before washing them further.

    Ivo KraaierIvo KraaierMånad sedan
  • P

    Julio IbarraJulio IbarraMånad sedan
  • Seems pretty easy in austrailia in in UK have same car tried installing coilovers today and snapped bolt LCA bolts 😂 and the bolt is still stuck in the bushings fml rust is not kind...

    Choco BlocoChoco BlocoMånad sedan
  • someone get marty a redbull hes lookin tired

    Scuba SteveScuba SteveMånad sedan
  • Greetings)) You guys are good) You also need to install a short steering rack from the Honda civic TypeR ek9

    Сергей ЕршовСергей ЕршовMånad sedan
  • I love the way you film these vlog style compared to the skipped steps before, so much more engaging when you show us all the steps as you do them and having to hold the camera. Makes it feel more relatable

    Thomas SearlsThomas SearlsMånad sedan
  • Moog: "A CRV is like a good civic, isn't it?" Marty: 😳

    Allen PlantAllen PlantMånad sedan
  • 3:08 "A CR-V is like a good Civic, isn't it?" --Internet comment section erupts into a war unseen prior to Armageddon

    vbddfy euuytvbddfy euuytMånad sedan

    William GriffinWilliam GriffinMånad sedan
  • Love the asmr sounds this this series gents, carry on!

    • Where ya guys been I’ve been waiting for the next mad civic video

      vbddfy euuytvbddfy euuytMånad sedan
  • Good mechanics are a national treasure. Like the guys said they have to deal with easy cars and nightmarish vehicles day in day out sometimes 7 days a week.

    Strongboy 72Strongboy 72Månad sedan
  • Former Honda Master Tech. Love the show and have been following for years. I hate Hondas. Just had to put that out there. Only watching this short series because I enjoy you blokes.

    That_GuyThat_GuyMånad sedan
  • They don't sell that Ryobi R18IW7 here in the states.. unless it's a different part number here

    Che1seabluesdrogba11Che1seabluesdrogba11Månad sedan
  • Did he trip going up the stairs?

    Shawn CliftonShawn CliftonMånad sedan
  • I have been working on cars since I was 8 years old with my dad now I'm 38, 30 years as a mechanic, thank you guys for your shout out to all of us mechanic's and love your channel guy's keep up the excellent work 😊 👍

  • Is it just me or... is marty super fucking excited to work on this nugget meanwhile moog wants to die lmao

    ThatScootsyThatScootsyMånad sedan
  • Moog “do you know where these are going?” Marty “In the BIN” 2:45 - 2:46

    Abandoned ExplorationAbandoned ExplorationMånad sedan
  • Im fine with spooning, but please guys, dont start forking on the show!

    Jimmy WännströmJimmy WännströmMånad sedan
  • Use black gloves under your MCM mechanic ripping! Great video, as always!

    JD GleasonJD GleasonMånad sedan
  • IN THE BIN ohhh sorry wrong video

    Prodromos Mitropoulos Studio EpicProdromos Mitropoulos Studio EpicMånad sedan
  • The subframe brace is to strengthen the subframe, plenty of People rip them apart when the rip hard on the track in the civic:) If you need bigblock you can get a crv block.

    tdnoztdnozMånad sedan
  • change your steering rack or inner tie rod ends. they are toooo loosy

    Roger SantosRoger SantosMånad sedan
  • Hot tip, ball joints go in a lot easier if you put them in the freezer an hour or 2 before you install them.

    Alan WilsonAlan WilsonMånad sedan
  • Hey so uhh.... IN THE BIN

    Hi there PersonHi there PersonMånad sedan
  • Where ya guys been I’ve been waiting for the next mad civic video

    J ReedJ ReedMånad sedan
  • Can we get a MCM T-Shirt that says "In the Bin!"

    Sea BassSea BassMånad sedan
  • You should plasti dip the civic in matte black, that orange is just ugly in my opinion

    Nikolay GanovskiNikolay GanovskiMånad sedan
  • "That's not why we're here but I think about these things sometimes" - literally all the thoughts I have while lying under a vehicle

    Matthew BloomfieldMatthew BloomfieldMånad sedan
  • Hope you are all safe from the floods, let us know 🙏 Regards from South Africa

    Keith NortjeKeith NortjeMånad sedan
  • You must flip the Bolt :P Best regards from Wolfsburg :)

    Gero v. E.Gero v. E.Månad sedan
  • Sex specs is back, but it's in 79 series land cruisers

    Simon PlantSimon PlantMånad sedan
  • Easiest balljoint ever 03 vw Jetta

    Staypuff DuncanlempStaypuff DuncanlempMånad sedan
  • Using "DISRESPECTED" in this Video Title.. Is rehashing old Videos. What happened to the VW Forester Turbo Car?????

    X5 - Camping & Stuff.X5 - Camping & Stuff.Månad sedan
  • What happened to the 4x4ing.. That was Short Lived.

    X5 - Camping & Stuff.X5 - Camping & Stuff.Månad sedan
  • Tons of money on a ricewok, yuk!

    Luis F. ArizandietaLuis F. ArizandietaMånad sedan
  • Acually all of my friends who ownd that car did crash or died (about 10 - 12 people) so watch out :P

    Tomciox23Tomciox23Månad sedan
  • Why don't you use any grease on all the bolts?

    Tomciox23Tomciox23Månad sedan
  • What happened to your camera guy?

    moto55yzmoto55yzMånad sedan
  • Honda verson 2wstd

    Nogood UsernameNogood UsernameMånad sedan
  • Liking this format! It can be annoying on a lot of your usual episodes where you say you've put something on a car with some music over it and move on quickly. It's a nice change that you're going into a bit more detail about how it actually all goes in and fits together.

    darrencoldarrencolMånad sedan
  • Forgot to replace inner tie rods. They were dangling everywhere 😭

    Edward PEdward PMånad sedan
  • The finicky roof perceptually embarrass because paperback physiologically prick besides a hard-to-find booklet. disgusting, hesitant friend

    Jackey ChenJackey ChenMånad sedan
  • Oh no. Hardrace. The low quality stuff that rusts away after 6 month with the cool name

    noliftracingnoliftracingMånad sedan
  • Heard about the flooding in South Eastern Australia..hope you guys are safe..I don't exactly know where you guys are based, but just reaching out to make sure you guys and your families are safe..

    Onkar KhotOnkar KhotMånad sedan
  • Marty needs to use the gloves with the rubber coated palms. They're like the loreal kids line of gloves; No tears!

    Kenneth LarsenKenneth LarsenMånad sedan
  • 18:27 Actually, any honda from the early 90's to early 2000's are perfect to learn how to modify and work on because pretty much every model throughout that decade were built using a lot of the same suspension designs and engine layouts, so for the most part, if you could work on one model, you could work on all of them with at least some form of familiarity. I have a 1990 integra 4 door and there's no way i'm gonna ever get rid of it even though right now it's a total mess with a blown up engine. It's actually a really fun car to work on when I have all the tools I need lol.

    Kas bKas bMånad sedan
  • Those sway bar kits are nice because they eliminate the chance of having your sway bar rip its mount right off the chassis. With that kit there's no chance of that happening since it gets rid of the stock swaybar mounts.

    Kas bKas bMånad sedan
  • Melee (May-Lay)

    TyTyMånad sedan
  • 20:10 United Airline thinks otherwise🤷‍♂️🤷‍♀️

    4IN140944IN14094Månad sedan
  • I really appreciate the detail of matching the blue from the jack stands with the new suspension components. Well done.

    Bill ShapkauskiBill ShapkauskiMånad sedan
  • the name: Mighty Car Mods me in my mind: Marty Car Moog

    sehhi vootysehhi vootyMånad sedan
  • My 2nd year as a mechanic.. it really is heavy on my body and i know i wil feel it when im older.. but cars are my passion and turning wrenches is my skill

    Chris van der WaltChris van der WaltMånad sedan
  • Big Appreciations to mechanics just started to learn what it takes to restore a car on an MR2 and each day I work on it I appreciate work of mechanics more and more!!!!

    • Back to basics refurb of a clean nugget. Doesn't get any better for me, lads. Keep up the epic content.

      sehhi vootysehhi vootyMånad sedan
  • Thanks heaps for the shout out and appreciation for the work we mechanics do. Bring back the unicorn farts!

    Joshua ShippJoshua ShippMånad sedan
  • double glove it, that way your hands won't get dirty if the outer one rips

    Jonathan ZanderJonathan ZanderMånad sedan
  • going to be a mad track weapon? wasnt that what the Lotus was for?

    Keith PrinnKeith PrinnMånad sedan
  • It’s a weap shirts!

    Ricky VillaRicky VillaMånad sedan
  • 2 gays

    AAMånad sedan
  • Send some dm's to boosted boiz they'll steer ya in a proper direction

    Troy PeacockTroy PeacockMånad sedan
  • Dripping steering rack boot usually means the seals are blown out of the rack. I guess we'll see if it was just moisture or it was beat up by the previous owner. Good job on the bump steer correction. Such a shame on a lowered car to deal with bumpsteer and trammeling.

    P SavelP SavelMånad sedan
  • you going to fix that subaru?

    ABeans07ABeans07Månad sedan